Kit consists of 500g Acrylic Solution and 1kg of binding powder
Approximate Volume 1.068 Litres
Acrylic resin composed of a water based acrylic solution with added micro fibres for increased strength and a binding powder. It contains no solvents or hazardous chemicals making it completely non-toxic and safe to use.
The product has a simple mixing ratio of 2:1 powder to liquid. Once combined the mixture has a low viscosity allowing it to flow into fine details and narrow undercuts. Once cured the resin which is white in colour is hard, strong and water resistant making it suitable for casting models, replicas, ornaments, prototypes and much more. It’s very stiff so it’s not recommend for items that require some flexibility.
- Solvent and VOC free
- Low odour
- Good reproduction of fine details
- Strong and stiff
- UV resistant
- Water resistant
- Friendly to silicone moulds
- Tools can be cleaned with water
MIXING RATIO: 2 PARTS POWDER TO 1 PART LIQUID
Mixing Time: 1-2 Minutes
Working Time: 6-8 Minutes
Demould Time: 20-40 Minutes*
*Depending on the thickness
The material reaches its full strength after all the water has evaporated. This generally takes 5-7 days but can vary greatly depending on the size of the casting and the temperature and humidity of the environment.
Wetting Solution for Silicone Moulds
When using a silicone mould we recommend the mould is wetted first with this spray or soapy water before pouring in the resin. Silicone rubber is hydrophobic so with the acrylic resin being water based it will want to repel the resin potentially leading to unsightly bubbles of air on the surface. Once the mould is wetted the resin will flow nicely into all the details.