Transparent Silicone Moulding Rubber 5kg Kit

Kit consists of 2.5kg of PART A and 2.5kg of PART B 


Total kit volume 4.71 Litres


PART A and PART B are both clear liquids which are odourless and non-toxic. They react to form a flexible, elastic, transparent material with outstanding release properties, a high chemical resistance and a temperature resistance of 200°C. There is practically no shrinkage (0.08%) and excellent reproduction of fine detail. For optimal clarity try to keep mould walls to a maximum of 10mm thick. This rubber is suitable for casting a wide range of materials please see below for more details.


Available in three hardnesses; soft medium and firm. The soft is better suited to moulding delicate, fragile items where the rubber needs to be soft and flexible enough to peel off without damaging the casting. The medium is suitable for the majority of cases. 


This product is not suitable for use with food. For a suitable product please click here


Unsuitable for applying directly to human skin for life casting. For a suitable product please click here


The maximum operating temperature is 180°C. For a high temperature rubber click here


For creating a two part mould or moulding a glass object a release agent is required click here


Can be pigmented to a wide range of colours click here


It can be softened to your own requirements using this softening additive click here


Can be made thixotropic for applying to vertical surfaces or to over head objects click here


 PropertiesUnits
 Soft
 Medium
 Firm
 Pot Life (25°C)Hours2.5 1.51.5
Cure Time (25°C)Hours129-108-9
Viscosity (25°C)Mpa.s32,00035,00040,000
 Density (25°C)g/cm31.061.061.06
HardnessShore A152840
 Linear Shrinkage%0.10.10.1
Tear StrengthKN/m2022.525
 Elongation at Break%460420380
Tensile StrengthMpa456


pdf-image-white.jpg Technical Data Sheet  pdf-image-white.jpg Safety Data Sheet Part A   pdf-image-white.jpg Safety Data Sheet Part B


SUITABLE FOR USE WITH:

  • Polyurethane resin 

  • Epoxy resin
  • Polyester resin
  • Acrylic resin
  • Plastisol (PVC)
  • Plaster
  • Cement
  • Polymer Clays
  • Waxes
  • Soaps
  • Metals with a pouring temperature below 200°C


*CURE INHIBITION*

Great care must be taken when handling and mixing all addition-cured silicone elastomer systems. All the mixing tools (vessels and spatulas) should be clean and constructed in materials which do not interfere with the curing mechanism. The cure of the rubber can be inhibited by the presence of compounds of nitrogen, sulphur, phosphorus and arsenic; organotin catalysts and PVC stabilisers; epoxy resin catalysts and even contact with materials containing these substances e.g. moulding clays, sulphur vulcanised rubbers, condensation cure silicone rubbers, onion and garlic.

£95.00 £0.00
Earn 0 reward points
QTY:
OUT OF STOCK
ADD TO WISHLIST