Thixo Body Mouding 5kg kit

Kit consists of 2.5kg of PART A and 2.5kg of PART B 


Total kit volume 4.62 Litres


This product is odourless, non-toxic and formulated specifically for applying to the human body. 


PART A is a red liquid and  PART B is a blue liquid which act as a visual aid, turning purple during the mixing process. The two components mix easily with a simple 1:1 ratio with a working time of 5-8 minutes with a cure time of 20-30 minutes @ 25°C.


Once cured the rubber is a flexible, elastic, material with outstanding release properties, a high chemical resistance and a temperature resistance of 200°C. There is practically no shrinkage (0.1%) and excellent reproduction of fine detail.


As the moulds will be thin to hold their shape when filling with the casting material an outer support will need creating whist the rubber is still in situ on the body. We recommend mod roc plaster bandages click here


One  Hand and Wrist
500g of Thixo Body Moulding  Rubber
3 x (15cm x 2.7m) Modroc  Bandages

One Arm with  Shoulder

2kg of Thixo Body Moulding  Rubber
8 x (15cm x 2.7m) Modroc  Bandages

Face
500g  of Thixo Body Moulding Rubber
3 x (15cm x 2.7m) Modroc  Bandages

Face and Partial  Neck
1kg of Thixo Body Moulding  Rubber
4 x (15cm x 2.7m) Modroc  Bandages

Front Half of Head  
1kg of Thixo Body Moulding  Rubber
5 x (15cm x 2.7m) Modroc  Bandages

Full Head and  Neck
2kg of Thixo Body Moulding  Rubber
10 x (15cm x 2.7m) Modroc  Bandages

Chest
2kg  of Thixo Body Moulding Rubber
8 x (15cm x 2.7m) Modroc  Bandages

Full Torso Front and  Back
7kg of Thixo Body Moulding  Rubber
34 x (15cm x 2.7m) Modroc  Bandages

One  Foot
1kg of Thixo Body Moulding  Rubber
4 x (15cm x 2.7m) Modroc  Bandages

One Lower  Leg
2kg of Thixo Body Moulding  Rubber
10 x (15cm x 2.7m) Modroc  Bandages

One Full  Leg
5kg of Thixo Body Moulding  Rubber
18 x (15cm x 2.7m) Modroc  Bandages


 PropertiesUnits
 Thixo Body
 Pot Life (25°C)Minutes
5-8
Cure Time (25°C)Minutes
20-30
Viscosity (25°C)Mpa.s5500
 Density (25°C)g/cm31.08
HardnessShore A20
 Linear Shrinkage%0.1
Tear StrengthKN/m26
 Elongation at Break%500
Tensile StrengthMpa6


pdf-image-white.jpg Technical Data Sheet  pdf-image-white.jpg Safety Data Sheet Part A  pdf-image-white.jpg Safety Data Sheet Part B


SUITABLE FOR USE WITH:

  • Polyurethane resin 

  • Epoxy resin
  • Polyester resin
  • Acrylic resin
  • Plastisol (PVC)
  • Plaster
  • Cement
  • Polymer Clays
  • Waxes
  • Soaps
  • Metals with a pouring temperature below 200°C


*CURE INHIBITION*

Great care must be taken when handling and mixing all addition-cured silicone elastomer systems. All the mixing tools (vessels and spatulas) should be clean and constructed in materials which do not interfere with the curing mechanism. The cure of the rubber can be inhibited by the presence of compounds of nitrogen, sulphur, phosphorus and arsenic; organotin catalysts and PVC stabilisers; epoxy resin catalysts and even contact with materials containing these substances e.g. moulding clays, sulphur vulcanised rubbers, condensation cure silicone rubbers, onion and garlic.

£95.00 £0.00
Earn 0 reward points
QTY:
OUT OF STOCK
ADD TO WISHLIST