Thixo Body Mouding 500g kit

Kit consists of 250g of PART A and 250g of PART B 


Total kit volume 462ml


This product is odourless, non-toxic and formulated specifically for applying to the human body. 


PART A is a red liquid and  PART B is a blue liquid which act as a visual aid, turning purple during the mixing process. The two components mix easily with a simple 1:1 ratio with a working time of 5-8 minutes with a cure time of 20-30 minutes @ 25°C.


Once cured the rubber is a flexible, elastic, material with outstanding release properties, a high chemical resistance and a temperature resistance of 200°C. There is practically no shrinkage (0.1%) and excellent reproduction of fine detail.



 PropertiesUnits
 Thixo Body
 Pot Life (25°C)Minutes
5-8
Cure Time (25°C)Minutes
20-30
Viscosity (25°C)Mpa.s5500
 Density (25°C)g/cm31.08
HardnessShore A20
 Linear Shrinkage%0.1
Tear StrengthKN/m26
 Elongation at Break%500
Tensile StrengthMpa6

SUITABLE FOR USE WITH:

  • Polyurethane resin 

  • Epoxy resin
  • Polyester resin
  • Acrylic resin
  • Plastisol (PVC)
  • Plaster
  • Cement
  • Polymer Clays
  • Waxes
  • Soaps
  • Metals with a pouring temperature below 200°C


*CURE INHIBITION*

Great care must be taken when handling and mixing all addition-cured silicone elastomer systems. All the mixing tools (vessels and spatulas) should be clean and constructed in materials which do not interfere with the curing mechanism. The cure of the rubber can be inhibited by the presence of compounds of nitrogen, sulphur, phosphorus and arsenic; organotin catalysts and PVC stabilisers; epoxy resin catalysts and even contact with materials containing these substances e.g. moulding clays, sulphur vulcanised rubbers, condensation cure silicone rubbers, onion and garlic.

£13.50 £0.00
Earn 0 reward points
QTY:
OUT OF STOCK
ADD TO WISHLIST