Kit consists of 500g of PART A and 500g of PART B
Total kit volume 925ml
PART A is a cream liquid and PART B is an amber liquid that have virtually no odour and react to form a strong, tough, non-greasy polyurethane plastic beige in colour.
The colour of the cured plastic can be changed with the addition of a colour pigment to part A prior to mixing the two components. We have a range of compatible colour pigments here
This product has a simple mixing ratio of 1:1 by weight. Please note the two liquids have different densities hence different volumes which is why the mixing ratio is equal parts by weight not volume.
The pot life is approximately 10 minutes and the casting can generally be de-moulded in one hour depending on the size of the casting.
The liquid mixture has a very low viscosity of 110 mPas enabling it to flow in fine details and deep undercuts whilst also minimizing bubbles.
Once cured it has both a good tensile and a high flexural strength making it excellent for prototypes, scale models, toys and producing detailed decorative objects etc.
The cure profile of this resin is unsuitable for roto/slush casting please
|Properties ||Units ||Slow Curing |
|Pot Life (25°C) ||Minutes ||10 |
|Demould Time (25°C) ||Hours ||2-4 |
|Viscosity (25°C) ||Mpa.s ||110 |
|Density (25°C) ||g/cm3 ||1.08 |
|Hardness ||Shore D ||70 |
|Linear Shrinkage ||% ||0.05 |
|Flexural Strength ||Mpa ||40 |
|Flexural Modulus ||Mpa ||800 |
|Tensile Strength ||Mpa ||28 |
|Elongation at Break ||% ||9 |
|Heat Distortion ||°C ||70 |