Slow Curing 12-14 min Pot Life Resin 5kg Kit

Kit consists of 2.5kg of PART A and 2.5kg of PART B 


Total kit volume 4.54 Litres


PART A is a cream liquid and PART B is a greenish liquid that have virtually no odour and react to form a strong, tough, non-greasy polyurethane plastic ivory white in colour.

The colour of the cured plastic can be changed with the addition of a colour pigment to part A prior to mixing the two components. We have a range of compatible colour pigments

This product has a simple mixing ratio of 1:1 by weight. Please note the two liquids have different densities hence different volumes which is why the mixing ratio is equal parts by weight not volume.

The pot life is approximately 12-14 minutes and the casting can generally be de-moulded in one hour depending on the size of the casting.

The liquid mixture has a very low viscosity of 60 mPas enabling it to flow in fine details and deep undercuts whilst also minimizing bubbles.

Once cured it has both a good tensile and a high flexural strength making it excellent for prototypes, scale models, toys and producing detailed decorative objects etc.

Please view the table at the bottom of this listing for the full technical specifications.

The cure profile of this resin is unsuitable for roto/slush casting please


 PropertiesUnits
 Slow Curing
 Pot Life (25°C)
Minutes12-14
Demould Time (25°C)Hours
2-4
Viscosity (25°C)
Mpa.s60
 Density (25°C)g/cm3
1.1
Hardness
Shore D
70-75
 Linear Shrinkage%
0.05
Flexural Strength
Mpa
50
 Flexural ModulusMpa
1150-1450
Tensile Strength
Mpa
30
Elongation at Break
%
7
Heat Distortion°C
75


pdf-image-white.jpg Technical Data Sheet  pdf-image-white.jpg Safety Data Sheet PART A  pdf-image-white.jpg Safety Data Sheet PART B 

£60.00 £0.00
Earn 0 reward points
QTY:
OUT OF STOCK
ADD TO WISHLIST