Polyurethane Rubber *Medium* Shore A 65 2.5kg Kit

£59.40
(Inc. 20% VAT)
(£49.50 Exc. VAT)
+
Information

Kit consists of 2kg of PART A and 500g of PART B

Total kit volume 2.3 Litres


PART A is a cream liquid and PART B is a amber liquid that have virtually no odour and react to form a strong, tough, flexible polyurethane rubber white in colour. This product has a similar hardness to natural rubber used in vehicle bushes/bump stops, seals and matting etc so can be used in the production of polyurethane replacement parts commonly known as poly bushes. For stiffer uprated sports bushes our firmer Shore A80 rubber can be used.

The colour of the cured plastic can be changed with the addition of a colour pigment to part A prior to mixing the two components. We have a range of compatible colour pigments here

This product has a mixing ratio of 100:25 by weight.


The fast versions pot life is approximately 6-7 minutes and the casting can generally be de-moulded in 1-2 hours depending on the size and especially the thickness of the casting.

The slow versions pot life is approximately 20 minutes and the casting can generally be de-moulded in 3-5 hours depending on the size and especially the thickness of the casting.

 

Properties Units  
Pot Life (25°C) Minutes 6-7 or 20
Demould Time (25°C) Hours 1-2 or 3-5
Viscosity (25°C) Mpa.s 360
Density (25°C) g/cm3 1.08
Hardness Shore A 65
Linear Shrinkage % 0.05
Flexural Strength Mpa -
Flexural Modulus Mpa -
Tensile Strength Mpa -
Elongation at Break % -
Heat Distortion °C 80

pdf-image-white.jpg Technical Data Sheet pdf-image-white.jpg Safety Data Sheet PART A pdf-image-white.jpg Safety Data Sheet PART B