Semi-Rigid Impact Resistant Casting Resin 500g Kit



Kit consists of 250g of PART A and 250g of PART B 


Total kit volume 460ml


PART A is a cream liquid and PART B is a clear liquid that have virtually no odour and react to form a tough, non-brittle, impact resistant, semi-rigid plastic ivory white in colour. If cast in thin sections the cured material can be bent and flexed making it excellent for delicate prototypes, scale models, toys and producing detailed decorative objects etc. Available in two different versions, a fast 3-4 minute pot life and a slow cure 10-12 minute pot life. Both cure profiles are suitable for roto/slush casting.

If cast in thin sections the cured material can be bent and flexed making it excellent for delicate prototypes, scale models, toys and producing detailed decorative objects etc. 


Available in two different versions, a fast 3-4 minute pot life and a slow cure 10-12 minute pot life.


This product has a simple mixing ratio of 1:1 by weight. Please note the two liquids have different densities hence different volumes which is why the mixing ratio is equal parts by weight not volume.


Both liquid mixtures have a low viscosity enabling it to flow in fine details and deep undercuts whilst also minimizing bubbles.


The fast version has the slightly lower viscosity of the two. The slow version is slightly softer and the most flexible with the fast version being 30% stiffer and 50% stronger in flexural strength. Please view the table at the bottom of this listing for the full technical specifications.


The colour of the cured plastic can be changed with the addition of a colour pigment to part A prior to mixing the two components. We have a range of compatible colour pigments


 PropertiesUnits
Fast Version
 Slow Version
 Pot Life (25°C)
Minutes3-4
10-12
Demould Time (25°C)Minutes20-30
50-70
Viscosity (25°C)
Mpa.s125-145
160-180
 Density (25°C)g/cm3
1.06-1.07
1.08-1.09
Hardness
Shore D
68-74
68-70
 Linear Shrinkage%
0.05
0.05
Flexural Strength
Mpa
26-28
17-18
 Flexural ModulusMpa
470-535
340-405
Tensile Strength
Mpa
16-18
14-16
Elongation at Break
%
7-14
8-15
Heat Distortion°C
50-60
50-60



pdf-image-white.jpg Technical Data Sheet *FAST*   pdf-image-white.jpg Technical Data Sheet *SLOW*


pdf-image-white.jpg Safety Data Sheet PART A      pdf-image-white.jpg Safety Data Sheet PART B 

£10.85 £0.00
Earn 0 reward points
QTY:
OUT OF STOCK
ADD TO WISHLIST