1-2-1 Easy Mould

 Simple 1:1 ratio and because of the very low viscosity can be used without a vacuum chamber.

There is practically no shrinkage (0.1%) and excellent reproduction of fine detail with high tensional and tear strength. 

Being an addition/platinum cured rubber its chemical and heat resistance (250°C) properties are superior to tin/condensation cure rubbers translating into a longer mould life. 

A wide range of casting materials can be used with this moulding rubber. Some example are: Polyurethane resin, Epoxy resin, Polyester resin, Acrylic resin, Plastisol/PVC, Plaster, Cement, Polymer Clays, Soaps and Waxes.