Ivory White Fast Cast Resin 500g Kit

Kit consists of 250g of PART A and 250g of PART B 


Total kit volume 454ml


PART A is a cream liquid and PART B is a greenish liquid that have virtually no odour and react to form a strong, tough, non-greasy polyurethane plastic ivory white in colour.

The colour of the cured plastic can be changed with the addition of a colour pigment to part A prior to mixing the two components. We have a range of compatible colour pigments here

This product has a simple mixing ratio of 1:1 by weight. Please note the two liquids have different densities hence different volumes which is why the mixing ratio is equal parts by weight not volume.

The pot life is approximately 5 minutes and the casting can generally be de-moulded in 30-40 minutes depending on the size of the casting. For longer pot life casting resins click here

The liquid mixture has a very low viscosity of 55 mPas enabling it to flow in fine details and deep undercuts whilst also minimizing bubbles.

Once cured it has both a good tensile and a high flexural strength making it excellent for prototypes, scale models, toys and producing detailed decorative objects etc. For a tough, impact resistant, semi rigid material that in thin sections has a degree of flexibility click here

Please view the table at the bottom of this listing for the full technical specifications.

The cure profile of this resin is unsuitable for roto/slush casting for a suitable resin click here


 PropertiesUnits
 Ivory White
 Pot Life (25°C)
Minutes5
Demould Time (25°C)Minutes
30-40
Viscosity (25°C)
Mpa.s55
 Density (25°C)g/cm3
1.1
Hardness
Shore D
70-75
 Linear Shrinkage%
0.05
Flexural Strength
Mpa
50
 Flexural ModulusMpa
1499-1600
Tensile Strength
Mpa
30
Elongation at Break
%
7
Heat Distortion°C
85


pdf-image-white.jpg Technical Data Sheet  pdf-image-white.jpg Safety Data Sheet PART A  pdf-image-white.jpg Safety Data Sheet PART B 

£9.60 £0.00
Earn 0 reward points
QTY:
OUT OF STOCK
ADD TO WISHLIST