Shop by Price
Shopping Basket

Easy Mould Silicone Moulding Rubber 2.2kg

Easy Mould Silicone Moulding Rubber 2.2kg
Our Price:  £27.50(Inc. 20% VAT)(£22.92 Exc. VAT)
+

Availability:  

  

In stock


Kit Consists of 2kg Silicone + 200g Catalyst

Shore Hardness A25

Approximate Volume 1.92 Litres
 

Simple mixing ratio of 10% part B to part A (10:1)
 
Pot Life Cure Time
30-40 minutes 7-8 hours

This product is a tin/condensation cured rubber and has been formulated to be a high quality flexible, elastic material with exceptional tensional and tear strength. There is almost no shrinkage (0.2%) and excellent reproduction of fine detail without the use of a vacuum chamber due to its low viscosity. It has a long mould life with outstanding release properties. This rubber is suitable for casting a wide range of materials in particular casting resins which we can also supply. Please see the bottom of the listing for examples of suitable casting materials.

The kit comprises of a white base rubber and a purple catalyst which provides a visual aid to ensure that the material is thoroughly mixed. We have also focused on minimizing the potential health risks to the user by formulating a non-toxic, non-flammable and virtually odourless catalyst unlike the majority of other condensation cure silicones that can use a toxic catalyst.


This product is not suitable for use with food. For a suitable product please click here

The catalyst is a skin irritant making this product unsuitable for applying directly to human skin for life casting. For a suitable product please click here

The maximum operating temperature is 180°C. For a high temperature rubber click here

This is a condensation/tin cured rubber so cannot be used as a mould for addition/platinum cured silicone rubbers as it will inhibit its cure.


For creating a two part mould or moulding a glass object a release agent is required click here

Can be pigmented to a wide range of colours click here

It can be softened to your own requirements using this softening additive click here

Can be made thixotropic for applying to vertical surfaces or to over head objects click here

 Physical Properties Values
  Viscosity mPas 18,000
  Density 1.08
  Tensile Strength Mpa 4.5
  Elongation 450%
  Tear Strength kN/m 26
  Shrinkage
0.2%
  Shore Hardness A25

SUITABLE FOR USE WITH

Polyurethane resin

Epoxy resin

Polyester resin

Acrylic resin

Plastisol (PVC)

Plaster

Cement

Polymer Clays

Waxes

Soaps

Metals with a pouring temperature below 180°C