Kit consists of 250g of PART A and 250g of PART B
Total kit volume 462ml
PART A is a cream liquid and PART B is a amber liquid that have virtually no odour and react to form a strong, tough, non-greasy polyurethane rigid plastic beige in colour. For flexible polyurethane rubbers click here
The colour of the cured plastic can be changed with the addition of a colour pigment to part A prior to mixing the two components. We have a range of compatible colour pigments here
This product has a simple mixing ratio of 1:1 by weight. Please note the two liquids have different densities hence different volumes which is why the mixing ratio is equal parts by weight not volume.
The pot life is approximately 3-4 minutes and the casting can generally be de-moulded in 30-40 minutes depending on the size of the casting. For longer pot life casting resins click here
The liquid mixture has a very low viscosity of 50 mPas enabling it to flow in fine details and deep undercuts whilst also minimizing bubbles.
Once cured it is the strongest of all our resins, having both a high tensile and a high flexural strength making it excellent for prototypes, scale models, toys and producing detailed decorative objects etc. For a tough, impact resistant, semi rigid material that in thin sections has a degree of flexibility click here
Please view the table at the bottom of this listing for the full technical specifications.
The cure profile of this resin is unsuitable for roto/slush casting for a suitable resin click here
| Pot Life (25°C)||Minutes||3-4|
|Demould Time (25°C)||Minutes||30-40|
|Elongation at Break||%||7-8|